Header
HomeInfoWeedRollenKokenKwekenBongsOnzinChatForumLinks
Header

A brutal design. Will even make the most basic cannabis very strong. Be careful!

WHAT YOU'LL NEED:

  • 1 foot and 2 feet pieces of plexiglass pipe, about 3 inches in diameter. You will have to make a "Y" shape splitting off from the main pipe at a 45° angle. You will need plastic epoxy!
  • An aluminum or brass stem thread on one end (the thread to the valve has to attach to the stem).
  • A threaded brass valve that closes in half a turn.
  • A bowl that matches the threads on the valve.
  • A drill with a drill bit as big as the stem.
  • A cap from an aerosol can that will fit in the end of the short Y off the main pipe, just tight enough to close it off.
  • One foot of rope or bungee cord.
  • Silicone caulk
death01

HOW IT WORKS:

Not quite as simple as a standard bong. The carburetor is the big pipe splitting off at 45°. This allows a LARGE amount of smoke to blast into your lungs VERY suddenly! The process is like this.
1. Light up.
2. Start smoking.
3. Close the valve (this cuts off all incoming air).
4. YANK the cord attached to the plastic aerosol top.
This causes a ton of smoke to go into your lungs instantly.
5. Pass out.

death02

Bron: Blur of insanity

Comments:

Er zijn nog geen comments toegevoegd. Wees de eerste!